Accidentally or carelessly dropping your phone into the water is always a hassle. Water damage can cause complicated technical faults in your phone, but it can be fixed. Knowing some tricks to repair water damage on an Android mobile is essential.
Is It Possible To Repair a Water Damaged Phone?
It would be best to have the patience and care to fix your water-damaged phone. If your phone is damaged by water, you can salvage it yourself or take it to a professional. Water-resistant phones are recommended whenever you buy a new phone.
After removing your phone from the water, you may be able to prevent the water from entering its delicate components. It is possible to protect your phone from water damage in several ways:
1- Removing Back Case
It is necessary to remove the back case from the phone before proceeding. It will allow more exposure to prevent battery damage. The air will flow into the battery, and the water will drain.
2- Shake Your Mobile Phone
When your phone falls into the water, water always affects the charging port area. Avoid accumulating water in the charging port area of your phone by shaking it. The water should stop coming out after a few shakes.
3- Keep Dry In a Cool Place
A cool place should be your first destination for drying your phone. Try to remove the sun and heat from your phone. Check it after some time has passed. Please turn it off before you allow it to dry in the sun.
4- Clean With A Vacuum Cleaner
Set your vacuum cleaner to a reasonable air-blowing rate. Drying out water on a phone, a vacuum cleaner reaches deeper into the covered area. Vacuuming your phone ensures the delicate parts remain intact.
5- Wait a While Before Turning it On
Take some time to allow your phone system to settle for a few minutes. Switching on your phone after it has been fixed is similar to changing your body after it has been exhausted.
After twenty minutes, you can start your phone. These repair tips may not work when your phone won’t turn on in certain situations.
How To Fix A Phone That Fell in Water And Won’t Turn On
A step-by-step guide to fixing water damage on your phone. Turn off your phone immediately if you drop it in water. In this regard, touch screens and water are opposites. All contacts will likely cause screen problems and may require a replacement. You can try the following methods:
I- Using A Hair Dryer
A hairdryer is the first step in repairing water damage to your phone. Hair dryers remove water quickly and prevent it from hiding inside phones. In any case, a professional should handle the hair dryer.
II- Wipe With A Paper Towel
You need a paper towel to clean if you use a hair dryer or air blower. In addition, wipe the battery thoroughly if it’s removable. Next, clean every open area, including the battery area.
III- Use Silica Gel To Apply
Silica gel packs are suitable for phone users. It restores your phone’s texture by removing moisture. Use the entire silica gel packet in case your cellphone has excess water.
IV- Heat With A Soldering Iron
Use heat to ensure stability and keep your phone case warm. When using a soldering iron, be sure to turn it off first. When you’re done, wait a few minutes before turning on your phone.
How to Fix Your Mobile From Water Damage Fast?
Repairing a water-damaged phone is the fastest way to fix it. A repair by an individual may prolong issues, but Carlcare guarantees prompt service.
Water damage can be fixed by unscrewing the phone immediately. Carlcare should repair a phone that has stayed in the water for a long time. It may be cheaper to get spare parts replacements.